- Home /
- Schlag Metal - No. 2.5 Standard Gold Loose Leaf
- Product Description
- Reviews (0)
Imitation gold leaf (also known as schlag metal, dutch metal or composition leaf) is a metal leaf made from a brass alloy that has been hammered into very fine sheets for use in gilding. The leaves are not nearly as thin as genuine gold leaves. Imitation gold leaf is a cost-effective alternative to genuine gold leaf, offering a metallic surface which is shinier than a gold leaf surface generally. It doesn't have such a soft or subtle surface as genuine gold leaf but is often used as a substitute where budget dictates.
This product is supplied as loose leaves in booklets of 25 leaves with each leaf having a dimension of 140 x 140mm. Each leaf in the booklet is separated by sheets of rouge paper but the leaf is not adhered to it, just sits loosely between the pages. In order to remove the leaf from the book we recommend you use a gilders knife slid under the leaf if you are placing it onto a cushion to cut into smaller pieces. This leaf is too heavy to pick up with a gilders tip, although it can be handled directly if done so delicately and with clean, grease-free fingers. You can pick up the leaf with your fingers, carefully picking each corner. Loose leaf is suitable for most surfaces but is usually used for more intricate and delicate work - for example, carved mouldings where transfer leaf is unsuitable.
Imitation gold leaf will tarnish over time and requires sealing to protect it, especially if the leaf is to be used outdoors or if the gilding is to be touched or handled regularly. We supply a number of lacquers and varnish that are suited for protecting metal leaf; in particular, we recommend Robersons’ Universal Lacquer due to its hardwearing nature and ease of application.
Size: 140 mm x 140 mm (you will need just over two booklets per flat square meter, not allowing for wastage or any overlaps)
Each booklet contains 25 leaves